Feasibility study to control fiber distribution for enhancement of composite properties via three-dimensional printing

The distribution of fibers in the composite (which takes into account both their locations and orientations) is one of the important factors that affect the mechanical properties of FRCs. However, this parameter depends on various factors during composite fabrication, and controlling the distribution of fibers in the produced material represents a significant challenge. In this study, the applicability of three-dimensional (3D) printing technique for controlling fiber distributions was evaluated. The fibers fabricated using a 3D printer were placed inside a mold to produce cementitious composites. Three-point bending tests were conducted and the results of the experiment were discussed.     

基于多特征融合的电影推荐系统

协同过滤算法（CF）根据用户-物品的评分矩阵做推荐，未考虑物品自身属性。本文将MovieLens数据集上的电影属性，作为影响推荐结果的因素，融合电影的简介、评论、评分、导演和演员等多种因素，进行推荐。使用CNN（卷积神经网络）和Word2Vec（Word to Vector,词向量模型）处理电影简介；使用AFINN（Finn rup Nielsen情感词典）处理评论，并对结果进行映射；对导演和演员数据进行建模，得到该因素下的预测评分，最后将各因素下的结果进行加权融合，通过调整权重，得到最佳效果。经验证，该方法的推荐性能优于传统的CF算法。     

High strain rate compressive response of the Cf/SiC composite

Carbon fiber reinforced ceramic owns the properties of lightweight, high fracture toughness, excellent shock resistance, and thus overcomes ceramic's brittleness. The researches on the advanced structure of astronautics, marine have exclusively evaluated the quasi-static mechanical response of carbon fiber reinforced ceramics, while few investigations are available in the open literature regarding elastodynamics. This paper reports the dynamic compressive responses of a carbon fiber reinforced silicon carbide (C_f/SiC) composite (CFCMC) tested by the material test system 801 machine (MTS) and the split Hopkinson pressure bar (SHPB). These tests were to determine the rate dependent compression response and high strain rate failure mechanism of the C_f/SiC composite in in-plane and out-plane directions. The in-plane compressive strain rates are from 0.001 to 2200?s^?1, and that of the out-plane direction are from 0.001 to 2400?s^?1. The compressive stress-strain curves show the C_f/SiC composite has a property of strain rate sensitivity in both directions while under high strain rate loadings. Its compressive stiffness, compressive stress, and corresponding strain are also strain rate sensitive. The compressive damage morphologies after high strain rate impacting show different failure modes for each loading direction. This study provides knowledge about elastodynamics of fiber-reinforced ceramics and extends their design criterion with a reliable evaluation while applying in the scenario of loading high strain rate.     

Alginate–chitosan composite hydrogel film with macrovoids in the inner layer for biomedical applications

Making of a layered composite using two biopolymer gels with regularly aligned voids in the inner layer is described in this article. Calcium alginate constituted the inner layer, within which voids of 500 μm diameter were embedded in monolayer or in multiple layers using a fluidic device for bubbling. The chitosan without any additional crosslinker was used to form the outer layer. The layered structure enabled compartmentalization of drug hold-up, and differential release rates. These aspects were reviewed using bovine serum albumin and vitamin B₁₂ as model solutes. The presence of voids at the inner layer of alginate increased the uptake, raising the level of absorptivity to more than 4000%. The composite film could hold two solutes at a time. The one, held inside the alginate layer started releasing only after 1 h of dipping in the release media. The adhesive strength between layers and the response of the composite film to compressive deformation are studied here. The effect of single or multiple layers of voids in the inner layer is reviewed. The slowing of degradation rate due to chitosan-encapsulation is experimentally determined. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47599.     

A Monte Carlo study of spring-exchange magnets containing ultra-high coercive phases

The aim of the present work is to study magnetization processes in the spring-exchange magnetic composites containing magnetically soft, hard and ultra-high coercive phases, experimentally found in Tb-Fe-B-Nb group of alloys. In order to modeling hysteresis loops a special Monte Carlo procedure,suitable for irregular geometry of the composites, was applied. The obtained results indicate that sufficiently strong coupling between soft and hard magnetic phase leads to collective, single-phase-like movement of such phases, which in turn, causes increase of the coercivity and internal magnetic energy.     

汽车同步器齿环用耐高温结构胶膜的性能研究

同步器齿环与碳纤维耐摩擦材料是通过胶粘剂实现粘接,而胶粘剂耐高温性能的优劣则是决定其使用寿命的决定性因素。本文研究了环氧树脂E-51体系、环氧树脂AG80体系以及基材表面处理工艺对于结构胶膜耐高温性能的影响,采用熔融共混法制备了胶粘剂并以玻璃纤维布为背衬制备了耐高温结构胶膜。采用高低温拉力机对不同体系制备的结构胶膜进行了常温、200℃高温的钢材搭接剪切强度的测试。结果表明,对于E-51体系,提高体系交联密度可显著增大常温剪切强度,但高温剪切强度明显下降;对于四官能度的AG80体系,AG80的用量是影响其高温性能的主要因素,同时基材表面喷砂水洗处理后可显著增大结构胶膜与基材粘接有效面积,进而显著改善高温性能。所制备的结构胶膜较常用胶粘剂使用更加便捷,耐高温性能优良,满足同步器齿环使用要求。     

螺旋线镀金薄膜磁控溅射设备的研制

本文详细介绍了用于螺旋线镀金薄膜的磁控溅射设备的研制过程。首先明确了该设备的研制难点,其次对设备的主要组成部分进行了详细的说明,针对设备的几个研制难点提出了解决方案,最后利用研制好的设备进行了膜厚均匀性分析实验。实验表明膜层均匀性良好,达到了预期要求,客户反馈良好。     

激励对往复式骨架油封密封性能的影响

为改善往复式骨架油封的泄漏问题,建立油封唇口密封区流体润滑的数值计算模型,模型考虑密封面粗糙形貌以及油封唇口的径向变形,通过求解雷诺方程分析密封区的流体力学特性,获得密封区的油膜厚度和压力分布,并分析激振频率和振幅对密封性能的影响规律。结果表明:随着激振频率的增加,内外行程中密封区的最小膜厚呈先增加后减小的变化趋势,激振频率越大,往复式骨架油封的密封性越差;内外行程中密封区的的最小膜厚随激振振幅的增加呈非线性增加,激振振幅越大,往复式骨架油封的密封性越好。综合考虑,为提高密封效果,往复式骨架油封适用于小频高幅的工作场合。     

Preparation of Al2O3-mullite thermal insulation materials with AlF3 and SiC as aids by microwave sintering

Al₂O₃-mullite composites were prepared under the synergy effect of AlF₃ and SiC aids by microwave heating. The phase composition, microstructure, porosity, flexural strength, thermal shock resistance, and thermal conductivity were investigated. The XRD results revealed that the content of mullite phase steadily increased with the increasing of AlF₃ content. The microstructure showed that the lower content (≤1 wt%) of AlF₃ led to the formation of granular mullite and the higher content (≥3 wt%) of AlF₃ led to the formation of mullite whiskers, which could form an interlocking structure. In addition, the SiC hot spots can also promote the generation of mullite whiskers by microwave sintering. The thermal shock resistance was significantly improved by the interlocking structure of mullite whiskers. The residual rate of flexural strength of the composite with 3 wt% AlF₃ was 86%. The composite with 3 wt% AlF₃ additives got its optimized thermal conductivity from 30°C to 950°C, the value was between 0.819 and 1.021 W/(mK), which possess excellent thermal insulation performance.